3D textile printing and doming
Technology and applications
Raised logos give garments visible, tactile volume. A 3D transfer is applied as a separate element; textile doming covers a colour print with glossy resin; digital 3D builds relief directly on fabric. DTG 3D combines colour printing with volume formed by a line pattern. Its white foundation may remain visible, making light garments preferable. Simple closed shapes work better than fine text. Resin may suffer heat damage, yellow under UV or crack on impact; DTG 3D needs gentle care.
Techniques and artwork limits
The figures below come from the supplier’s technical guide. They are not universal limits for every product. Suitability, marking area, colours and care must be confirmed for the selected product and artwork before ordering.
3D transfer
- Minimum letter height (+/−): 8 / 10 mm
- Minimum line width (+/−): 1.5 / 2 mm
- Colours / special condition: Simple raised logo
Source: supplier technical guide, p. 26.
Textile doming
- Minimum letter height (+/−): — / 1.7 mm
- Minimum line width (+/−): — / 0.8 mm
- Colours / special condition: CMYK, resin layer
Source: supplier technical guide, p. 29.
Digital 3D
- Minimum letter height (+/−): 5 / 6 mm
- Minimum line width (+/−): 1.5 / — mm
- Colours / special condition: Up to 4 colours; relief up to 5 mm
Source: supplier technical guide, p. 31.
DTG 3D
- Minimum letter height (+/−): 6 / — mm
- Minimum line width (+/−): — / — mm
- Colours / special condition: CMYK; relief 1–2 mm
Source: supplier technical guide, p. 34.
How do I choose a marking method?
Send the logo as AI, SVG, EPS or vector PDF. For photographs use at least 300 dpi at final print size only where the technique supports images. Lettering must remain legible at actual size; negative detail means an unprinted line or letter within a printed area.
Care: for textiles prefer washing inside out at up to 30°C, avoid bleach, tumble drying and ironing directly on the marking, unless the product requires stricter care. For drinkware prefer hand washing; dishwasher suitability needs confirmation for the item and decoration.
For a suitable solution, send the product code, quantity, logo, desired marking size and deadline. Price depends on the product, area, colours, setup and quantity. Special finishes require a product-specific check and, where necessary, a sample; the picture illustrates the technique rather than guaranteeing compatibility with every item.
Related marking methods and products
Compare these alternatives for your project:
Start your product selection here; marking suitability is confirmed for each item: