A WIDE SELECTION OF PROMOTIONAL GIFTS

All promotional products from one place - convenient, fast and professional service

Lanyards and name badges with logo: a guide for events and conferences

Home Blog Lanyards and name badges with logo: a guide for events and conferences
25.10.2026

Share this article:

The lanyard and name badge are the first thing a conference attendee receives and the last thing the organiser plans. The result: lanyards too narrow for the logo to be legible, badges that flip over, and a colour code nobody understands. This guide helps you choose lanyard width, material, print and fittings, and design a name badge that makes registration and networking easier.

For a wider range of event items, see our promotional products with logo. Here we focus only on lanyards and name badges, because this is where small decisions are most visible.

In short

  • The most common lanyard widths are 10, 15, 20 and 25 mm; for a logo plus event name, 20 mm is usually the most sensible compromise.
  • Full-colour dye sublimation suits white or light polyester; for a dark lanyard and a one- or two-colour logo, choose screen printing.
  • Choose a safety breakaway that opens under pull and reduces the risk of choking.
  • The name on the badge must be large and high-contrast; without a holder, print the name on both sides.
  • A colour code by attendee type only works if it is simple and the colour is accompanied by text.
  • A "recycled" or "eco" claim needs evidence (such as a GRS or RCS certificate); from 27 September 2026 unsubstantiated generic environmental claims are banned in the EU.

Lanyard width: what it affects

Width determines how much text fits and how comfortable the lanyard is around the neck. Suppliers typically offer 10, 15, 20 and 25 mm lanyards. The table helps you choose.

WidthWhat fitsSuitsWatch out
10 mmA simple logo or one short wordKey strap, low-cost staff lanyardLonger text is unreadable
15 mmLogo and a short event nameTrade fairs, internal trainingFine lettering may disappear
20 mmLogo, event name, web addressConferences, larger eventsThe most versatile choice
25 mmSeveral logos (sponsors), larger textSponsor visibility, festivalsHeavier, less comfortable for some people

It is also worth knowing how people see lanyards themselves. In ASI's 2026 Ad Impressions Study, the buttons, lanyards and stickers category came last among international respondents' most wanted gifts (6%), yet 62% of US respondents would keep such an item for at least a year. The conclusion: a lanyard is primarily a tool, not a gift. Its value comes from comfort, legibility and reuse.

A good rule of thumb: if only your logo goes on the lanyard, 15 mm is enough. If you add sponsor logos or the event name, choose 20 or 25 mm. If the logo is long and horizontal, check on the mock-up that it is legible within the width.

Material: polyester, rPET or bamboo

Polyester

The most common material: durable, inexpensive and the only one on which dye sublimation gives a full-colour result. A smoother satin-like surface produces a sharper print than ribbed tubular lanyards.

rPET, or recycled polyester

rPET is polyester made from recycled plastic and behaves much like ordinary polyester in printing. If you want to say "made from recycled material" on the lanyard or in event communications, ask the supplier for evidence. Textile Exchange's GRS and RCS standards require third-party certification: GRS requires at least 20% recycled content plus social and environmental criteria, RCS at least 5% recycled input. In addition, Directive (EU) 2024/825 bans unsubstantiated generic environmental claims such as "eco-friendly" or "eco" from 27 September 2026.

Bamboo

Bamboo lanyards are soft and look natural, but they are often viscose made from bamboo. The EU textile fibre names regulation only allows fibre names on its list, and testing institute Hohenstein notes that EU authorities take action when viscose is sold as bamboo fibre. So ask for the exact composition and do not write "100% bamboo" unless the manufacturer can prove it.

You will find sustainable options on our sustainable promotional products and eco products pages.

Print: sublimation or screen printing

In sublimation, heat and pressure turn the dye into a gas that enters the polyester fibre. As explained here, it needs white or light 100% polyester, because sublimation ink is transparent and cannot cover a dark base. The print does not crack or peel, but prolonged UV exposure can fade it.

PropertySublimationScreen printing
ColoursFull colour, gradients, photos1–3 exact colours
Lanyard colourWhite or light polyester (background is printed)Dark lanyards too
DurabilityDye is in the fibre, does not peelLayer on the surface, very good but can wear over time
SuitsMulticolour brands, sponsor logos, patternsA simple logo on a contrasting lanyard

Because lanyards twist around the neck, double-sided printing makes sense: the logo is visible whichever side faces out. More about screen printing on our screen printing service page.

Safety breakaway and fittings

A safety breakaway is a plastic clip at the back of the lanyard that opens if the lanyard gets caught and pulled. Suppliers describe it as a way to eliminate choking hazards. At events with machinery, doors, crowds or children, it should be the default.

  • Metal hook (lobster or trigger hook): universal, fits punched badges and card holders.
  • Bulldog clip: for cards you do not want to punch.
  • Buckle at the end: lets you remove the badge or keys without taking the lanyard off.
  • Phone or card loop: for lanyards that double as employees' everyday access card lanyard.

Choose a hook that matches the badge holder's hole. If the badge has two holes, a double-ended lanyard keeps it straight and stops it flipping.

Name badge: format, content and legibility

Formats

FormatSizeSuits
ID-1 (bank card size)85.60 × 53.98 mmAccess cards, staff cards, rigid plastic cards
A7 / ID-274 × 105 mm / 105 × 74 mmSmaller events, seminars
A6105 × 148 mmConferences; the back fits the agenda or WiFi details

Card sizes come from ISO/IEC 7810 and A sizes from ISO 216. Check that badge and holder formats match before ordering them separately.

What to put on the badge

An inclusive events guide recommends printing the name in a large, clear font, favouring a plain black-on-white design and keeping text minimal. If you do not use a holder, print both sides so the badge remains readable when it flips.

  • First name large, surname smaller.
  • Company and, if needed, role.
  • Attendee type as text (for example SPEAKER, PRESS).
  • No email, phone or other personal data unless the attendee has agreed.

The last point is also a data protection issue. One of the GDPR principles is data minimisation: data must be adequate, relevant and limited to what is necessary for the purpose. A name badge is for introductions, not for sharing contact details.

Colour codes by attendee type

Different lanyard colours help security, the registration desk and volunteers see at a glance who is who. The table below is a template you can adapt.

Attendee typeExample colourText on lanyard or badge
VisitorMain brand colourEvent name
SpeakerContrasting tone (e.g. red)SPEAKER
Organiser / crewBlackCREW
VolunteerOrangeVOLUNTEER
PressYellowPRESS
Partner / sponsorSilver or greyPARTNER

Three rules that make a colour code work:

  • No more than 4–6 colours. Nobody remembers more.
  • Always add text next to the colour. Some people do not distinguish colours well, so the type must also be written.
  • Avoid the sunflower pattern. A green lanyard with sunflowers is used internationally as the Hidden Disabilities Sunflower, with which a person voluntarily shares that they have a non-visible disability. Official products are sold by the scheme's owner, so do not use a similar design on your event lanyard.

Example: a conference with 400 attendees

This example is fictional; quantities and spare stock are illustrative, not Logotrade recommendations on price or lead time.

  1. Attendees: 320 visitors, 40 speakers, 25 crew and 15 journalists.
  2. Lanyard: 20 mm rPET, double-sided sublimation, safety breakaway and metal hook. Visitors get the brand colour, the others three distinct colours, with the attendee type printed on the lanyard as text.
  3. Spares: a small reserve per type for late registrations and damage (about 5% in this example).
  4. Badge: A6 in a card holder; large first name, company and type on the front, agenda and WiFi details on the back.
  5. Reuse: the event name is printed without the year, there is a collection box at the exit, and lanyards and holders are reused next year.
  6. Brief: the supplier receives quantities per colour, logo as a vector file, lanyard width, fitting type and the date by which the lanyards must arrive. Lead time and minimum quantity are requested in the quote.

Checklist before you order

  1. Number of attendees per type, plus spares.
  2. Lanyard width and material (polyester, rPET, bamboo/viscose).
  3. Print: sublimation or screen printing; one or two sides.
  4. Safety breakaway: yes or no (for events, preferably yes).
  5. Fitting: hook, bulldog clip, buckle.
  6. Badge format and a matching holder.
  7. Badge content: large name, company, type as text; no unnecessary personal data.
  8. Colour code: up to 4–6 colours, each with text.
  9. Environmental claims: GRS/RCS evidence, or avoid the claim.
  10. Reuse: design without the year, collection box.
  11. Deadline: ask for production and delivery time in the quote and leave a buffer before registration opens.

Common mistakes

  • A long logo on a narrow lanyard. On 10 mm a long logo is illegible.
  • Sublimation on a dark lanyard. Transparent dye cannot cover a dark base; choose a light lanyard or screen printing.
  • No safety breakaway. At a crowded event it is a simple, inexpensive safety feature.
  • A small name on the badge. If it cannot be read from two steps away, the badge fails its purpose.
  • Colour-only distinction. A colour code without text does not work for everyone.
  • The year on the lanyard. It prevents reuse next year.
  • An unverified "eco" claim. A recycled content claim without certification can be misleading.

For choosing other conference items, see more guides on our blog.

Frequently asked questions

What is the best lanyard width?

For most conferences, 20 mm is a good compromise: the logo and event name fit and the lanyard is comfortable.

Does sublimation print wear off?

It does not peel or crack because the dye is in the fibre. Prolonged direct sunlight can, however, fade the colours.

What is a safety breakaway and do I need one?

It is a clip that opens under pull and reduces the risk of choking. It is recommended at public events.

What should not go on a name badge?

Contact details and other personal data not needed for introductions, unless the attendee has agreed.

Is an rPET lanyard always more sustainable?

It contains recycled material, but the claim must be substantiated, for example with a GRS or RCS certificate. Reusing the lanyard has the biggest impact.

Can lanyards be reused next year?

Yes, if the design does not include the year and the lanyards are collected at the end of the event.

Experience with event orders and promotional products with logo

Logotrade OÜ, based in Tallinn, has helped companies plan and order branded products since 2004 and delivers across Estonia. We belong to the international promotional products networks PSI and ASI and are a member of the Estonian Chamber of Commerce and Industry. Alongside lanyards, the registration desk can use small giveaways, writing instruments and conference bags; our advertising design team can help with the colour code and badge design. See also the product catalogue, our services, past work in the portfolio and other guides on the blog.

Send the number of attendees per type, preferred width, colours and event date to logo@logo.ee or via the contact form. We will propose a suitable lanyard, badge and exact schedule.

Sources

Autor: Anti Saluneem

Share this article:

Contact