CE marking and declaration of conformity: what to ask your supplier
Bluetooth speakers, wireless earbuds, power banks and wireless chargers are popular gifts, but with electronics it is not enough that the product looks good and the logo sits nicely. On the EU market a device must comply with several pieces of legislation, and the supplier must be able to prove it with documents. This guide explains what the CE marking and the EU declaration of conformity mean, and which questions to ask your supplier before ordering hundreds of devices with your logo.
Electronic business gifts with logo are a good choice when they stay in use for years. They are a poor choice when the device will not charge with a standard cable, the battery swells in its first winter, or customs asks for documents the supplier cannot provide.
In short
- The CE marking is not a quality mark or an official approval. It is the manufacturer's statement that the product meets the applicable EU requirements, and it must be backed by a declaration of conformity and technical documentation.
- Bluetooth and Wi-Fi devices are radio equipment and fall under the Radio Equipment Directive 2014/53/EU.
- Since 28 December 2024, new headphones, speakers, mice, keyboards and several other devices sold in the EU must charge via USB-C; for laptops the requirement applies from 28 April 2026.
- The Batteries Regulation (EU) 2023/1542 has applied since 18 February 2024 to all batteries placed on the EU market, including portable batteries built into devices.
- The WEEE Directive applies to electronics: the device must carry the crossed-out wheeled bin symbol, and old devices are collected separately.
- If the product is placed on the market under your company's name or trade mark, manufacturer responsibility may pass to you. Clarify this with the supplier before ordering.
What the CE marking actually means
According to the European Commission, the CE marking shows that a product sold in the European Economic Area has been assessed and meets safety, health and environmental protection requirements. It is mandatory for products covered by legislation that requires it, and affixing it to other products is forbidden. It is just as important to know what it does not mean: the CE marking is not an approval by any EU or national authority, and it does not indicate where the product comes from.
The manufacturer is responsible for the CE marking. The manufacturer carries out the conformity assessment, compiles the technical file and the EU declaration of conformity and affixes the marking – also when the product is made outside Europe. According to the Commission's guidance for manufacturers, the marking must be visible, legible and at least 5 mm high, and if it cannot be affixed to the product it goes on the packaging and accompanying documents.
What the EU declaration of conformity is
The declaration of conformity is a document in which the manufacturer declares under its sole responsibility that the product meets the requirements. Among other things it contains:
- the manufacturer's name and address;
- product identification and essential characteristics;
- the legislation and standards to which conformity is declared;
- the notified body's number, if a notified body took part in the conformity assessment;
- a legally binding signature.
For radio equipment, the EU declaration of conformity or its simplified version must accompany the device.
Which rules apply to electronic business gifts with logo
Several pieces of legislation can apply to one small gift at the same time. The table helps you see what to ask about for typical products.
| Product | Radio Equipment Directive (RED) | USB-C requirement | Batteries Regulation | WEEE |
|---|---|---|---|---|
| Bluetooth speaker | Yes | Yes, if charged by cable | Yes (built-in battery) | Yes |
| Wireless earbuds | Yes | Yes, if charged by cable | Yes | Yes |
| Wireless mouse or keyboard | Yes | Yes, if charged by cable | Yes, if it has a battery | Yes |
| Power bank | No, if it has no radio function | Not on the directive's device list | Yes | Yes |
| Wireless (induction) charger | Ask the supplier | Not on the list | If it has a battery | Yes |
| USB stick, corded desk lamp | No, if it has no radio function | Not on the list | No, if there is no battery | Yes |
The table is a simplification. For a specific product, the manufacturer must determine which legislation applies – for example, electromagnetic compatibility or restriction of hazardous substances requirements may be added. Your job is to ask what the product complies with and to get it in writing.
Bluetooth and the Radio Equipment Directive
Under the Radio Equipment Directive 2014/53/EU, radio equipment is an electrical or electronic product that intentionally emits or receives radio waves for radio communication. Bluetooth and Wi-Fi are radio communication, so Bluetooth speakers, headphones and wireless mice fall under the directive. Its essential requirements cover health and safety, electromagnetic compatibility and efficient use of the radio spectrum.
According to the Commission's guide, the manufacturer must mark the device with a type, batch or serial number and its name or registered trade mark and postal address, include instructions and safety information with frequency bands and transmission power, and keep the technical documentation and declaration of conformity for 10 years. The importer adds its own name and address to the device.
Cybersecurity
Additional cybersecurity requirements began to apply to internet-connected radio equipment in August 2025 (Delegated Regulation (EU) 2022/30). The Commission has decided to replace them with the Cyber Resilience Act, whose main obligations apply from 11 December 2027. If your gift is a smart device that connects to the internet, ask the supplier how these requirements are met.
USB-C common charger: what is mandatory
Directive (EU) 2022/2380 amended the Radio Equipment Directive and introduced the EU common charger. According to the Commission's overview, since 28 December 2024 wired-charging mobile phones, tablets, digital cameras, headphones, headsets, portable speakers, handheld game consoles, e-readers, earbuds, keyboards, mice and portable navigation systems must use a USB-C port. For laptops the requirement applies from 28 April 2026.
- The charger does not have to be in the box. Consumers must be able to buy the device without a charger. A pictogram on the packaging shows whether a charger is included.
- Charging information label. The device must come with information on the power it needs and whether it supports fast charging.
- Fast charging is harmonised. Devices that can be charged at more than 5 V, 3 A or 15 W must support USB Power Delivery.
- Power banks are not on the list. Even so, USB-C input and output is the practical choice, because the recipient's devices probably charge with the same cable.
In its June 2026 report the Commission named smartwatches, fitness trackers and AR/VR headsets among possible new categories, so for these it is worth asking whether the supplier has already switched to USB-C.
Batteries, the Batteries Regulation and WEEE
Batteries Regulation (EU) 2023/1542
The new Batteries Regulation entered into force on 17 August 2023 and has applied since 18 February 2024. It replaced the earlier Batteries Directive and regulates the whole battery life cycle from raw materials and design to recycling. It also covers portable batteries built into devices and includes requirements on their removability and replaceability (Article 11, with derogations). The regulation's requirements are phased in, so ask the supplier which labelling and information requirements the product already meets.
WEEE: electronic waste
The WEEE Directive 2012/19/EU requires separate collection and proper treatment of electronic waste. According to the Commission, 14.4 million tonnes of electrical and electronic equipment were placed on the EU market in 2022, while 5 million tonnes of e-waste were collected. The device must carry the crossed-out wheeled bin symbol, meaning it must not be thrown away with household waste. When choosing promotional electronics, that is a good reason to prefer a quality device that stays in use rather than a cheap gadget.
Checklist: what to ask the supplier
- EU declaration of conformity for the specific model (the model name must match the quote).
- Who the manufacturer is – whose name, trade mark and postal address are on the product and packaging.
- Where the CE marking is – on the product or, if that is not possible, on the packaging and documents.
- For radio equipment, frequency bands, transmission power and a user manual in a language the recipient understands.
- Charging interface – does the device charge via USB-C, and is a charger included.
- Battery data – type, capacity and whether the battery is replaceable.
- Markings – crossed-out wheeled bin symbol, type or serial number, importer details.
- Logo position – make sure the print or engraving does not cover mandatory markings.
- A sample before mass production: check markings, charging and packaging.
Suitable ways to apply a logo to electronics often include pad printing, UV printing and laser engraving. What matters most is that the logo does not cover mandatory markings.
Example: 200 Bluetooth speakers as trade fair gifts
Example: A software company wants to hand out 200 Bluetooth speakers with an engraved logo at a trade fair. The supplier offers two models, one noticeably cheaper than the other.
- Documents. The buyer asks for the EU declaration of conformity for both models. The more expensive model comes with a full declaration referring to the Radio Equipment Directive. For the cheaper model only a factory test report is sent, not a declaration of conformity.
- Charging. The more expensive model charges via USB-C, the cheaper one via an older micro-USB port. As portable speakers must use USB-C since 28 December 2024, the cheaper model is ruled out.
- Markings. On the sample the buyer checks that the CE marking, the crossed-out bin symbol, the model number and the manufacturer's address are still visible after engraving.
- Manual. The buyer asks for a short manual in Estonian, as most visitors are from Estonia.
- Order. After the sample is approved, the supplier confirms production time, price and minimum quantity in the quote.
Result: the buyer pays more per speaker but does not have to worry about the gift failing EU requirements.
Common mistakes
- Trusting only the CE logo on the product. The mark is easy to print; always ask for the declaration of conformity.
- Confusing a test report with a declaration of conformity. A lab report is evidence but does not replace the manufacturer's signed declaration.
- The declaration covers a different model. Check that model name and number match.
- The logo covers mandatory markings. Engraving or print must not hide the CE marking or the bin symbol.
- An outdated charging port. Devices covered by the directive must have USB-C.
- Own-brand packaging without agreement. If your company appears as the manufacturer on the packaging, you may take on the manufacturer's obligations. The arrangement must be clear.
Frequently asked questions
Does the CE marking mean the product is safe and of high quality?
The CE marking is the manufacturer's statement that the product meets the applicable EU requirements. It is not an official approval or a quality mark. Reliability is better shown by the declaration of conformity, the supplier's track record and your own check of a sample.
Do we become the manufacturer if our logo is printed on the product?
According to the Commission's guidance, whoever places a product on the market under its own name or trade mark takes on the manufacturer's obligations. That is why it matters whose name and address appear on the product and packaging as the manufacturer. Discuss this with the supplier and, if in doubt, with a lawyer.
Does a power bank have to use USB-C?
Power banks are not on the common charger directive's device list. USB-C is still the practical choice, because most of the recipient's devices already use the same port.
Does the declaration of conformity have to be in the local language?
The Commission provides the EU declaration of conformity template in all EU languages. For language requirements for documents and manuals, ask the supplier and, if needed, the national market surveillance authority – in Estonia, the Consumer Protection and Technical Regulatory Authority (TTJA).
How long must the manufacturer keep the documents?
For radio equipment, the manufacturer must keep the technical documentation and declaration of conformity for 10 years, and the importer keeps a copy of the declaration for the same period.
What should we do with old electronics no longer in use?
A device bearing the crossed-out bin symbol must not go in household waste. Take it to an e-waste collection point or ask the seller about take-back.
Logotrade helps you choose compliant electronics
Logotrade OÜ is a Tallinn-based supplier of branded gifts that has helped companies since 2004 to choose gifts that actually get used, and delivers across Estonia. We are a member of the international promotional products networks PSI and ASI and of the Estonian Chamber of Commerce and Industry. With electronics we request the manufacturer's documents before confirming the quote, so that you can make an informed choice. See our portfolio and decoration options on the services page. More guides are on the Logotrade blog.
Send the product type, quantity, logo and delivery date to logo@logo.ee or use the contact page. Browse the product catalogue, including electronics, gift sets and high-end corporate gifts. In the quote we confirm price, production time and minimum quantity and attach the product documents provided by the manufacturer.
Sources
- European Commission: CE marking
- European Commission: obligations of importers and distributors
- European Commission: Radio Equipment Directive 2014/53/EU
- European Commission: common charger (USB-C)
- European Commission: Batteries Regulation (EU) 2023/1542
- European Commission: WEEE Directive 2012/19/EU