Company clothing sizes: how to order the right sizes and quantities
When companies order branded clothing, the thing that goes wrong most often is not the logo or the colour but the sizes: half the hoodies are too big, the T-shirts ordered for women are too tight, and the most popular size runs out first. Because branded garments are made to your order, you cannot simply take them back to a shop later.
This guide shows how to collect sizes from employees, how to read a manufacturer's size chart, when to choose a unisex or a women's cut, and how much reserve to keep. The same principles apply when you order textile logo merchandise for an event or for clients.
In short
- Size labels are not the same across manufacturers. One brand's M can be another brand's L – always compare the specific model's measurement chart in centimetres.
- Collect sizes with a survey and include the size chart of the exact model you are ordering, not a generic "S–XXL".
- Offer a choice of cut. A unisex cut suits many people, but a women's cut often fits better; let people choose.
- Try before you order. Ask in your quote whether sample sizes of the model are available.
- Keep a small reserve in the most common sizes for new hires and exchanges – not in the extreme sizes.
- Branded products usually cannot be returned or exchanged because they are made to your order – so confirm sizes before production.
Why sizes go wrong
The first reason is that the labels S, M and L are each manufacturer's own decision. Two shirts with the same size label can differ noticeably in chest width, length and sleeve length. The second reason is the cut: regular, slim, oversize and women's cuts fit the same person completely differently. The third reason is the process – sizes are asked too late, too vaguely or not at all, and the buyer sets quantities by gut feeling.
Every mistake costs money: a hoodie that is too big stays in the wardrobe and the logo never reaches public space. If company clothing is part of your brand, the right size is as important as the right Pantone shade.
Collecting sizes: how to run a survey people actually answer
A good survey is short, gives respondents the information they need and has a deadline. Run it only once the model has been chosen – otherwise you are asking for a size for a product whose measurements nobody knows.
- Choose the model and ask the supplier for its size chart. The chart should show at least chest width and length in centimetres for each size.
- Add the chart and instructions to the survey. "Take your favourite shirt, lay it flat on a table and measure from armpit to armpit and from the shoulder seam to the hem. Compare with the chart."
- Ask about the cut. Unisex or women's – if the model comes in both.
- Ask for a size, not body measurements. People do not want to share their measurements; the chosen size and, if needed, a note ("prefer looser") are enough.
- Set a deadline and send one reminder. Announce in advance which size will be ordered for those who do not reply.
- Keep the data in one table with name, department and delivery address if the clothing goes to different locations.
If the clothing is for event guests or clients you cannot survey, draw on experience from previous events, choose a model with a looser fit and hand out sizes from a counter on site rather than from pre-packed bags. That way each guest can pick the right size.
Survey answers are personal data; collect only what the order needs and delete the table once the order is complete.
Unisex, women's cut or something else?
A unisex cut usually means a straighter garment based on men's sizing. It simplifies the order, but for many women it is wide in the shoulders and long. A women's cut is tapered and often has shorter sleeves. The table below helps you choose.
| Cut | Who it suits | What to watch | When to choose it |
|---|---|---|---|
| Unisex / regular | Most men and some women who prefer a looser fit | Shoulders and length may be too big for women | Event T-shirts, volunteers, large and unknown groups |
| Women's cut | Women who prefer a more fitted shape | The size chart differs from the unisex model; the same letter does not mean the same width | Team clothing worn every day |
| Slim fit | People who wear narrower clothes | Many choose one size up; measure against the chart | Client-facing roles, sales team, smarter style |
| Oversize / relaxed fit | People who like a streetwear style | Do not size down without checking the chart | Hoodies, younger audiences, fan merchandise |
A good solution is to choose a model available in the same fabric and shade in both unisex and women's cuts. The team looks consistent, yet everyone gets a garment that fits. You will find suitable models in our textile range.
How to read a manufacturer's size chart
The size chart is the most reliable information you have before a sample. Pay attention to the following:
- Are the measurements of the garment or of the body? Garment measurements (e.g. half chest width measured flat) can be compared with your own clothing; body measurements show who the size is intended for.
- Chest width matters most. It determines whether the garment fits; length and sleeve determine whether it looks good.
- Compare different models from the same manufacturer. Even one brand's T-shirt and hoodie may follow different sizing.
- Ask about shrinkage. Cotton products may change size when washed; ask the supplier whether there is information for the model.
If the garment is in direct contact with the skin, check the material too. OEKO-TEX STANDARD 100 class 2 is intended for products in direct contact with skin. You can check a certificate's validity in the OEKO-TEX Label Check, and according to Hohenstein's guide it is worth checking whether your exact model is within the certificate's scope.
Sample set and try-on day
The fewest mistakes happen when people can try the garment on before ordering. Ask in your quote whether sample sizes of the chosen model are available and on what terms. If so:
- put the samples out in the office for a day or two and label each size with its measurements;
- let people record their size in the same table as the survey answers;
- send remote workers the chart and measuring instructions and ask which similar garment they compared themselves with.
If sample sets are not available, even one sample in the most common size helps: you can judge fabric weight, cut and how the logo placement looks. It is sensible to approve logo size and position for all sizes, because the same print width may not look good on both XS and XXL. Our advertising design service can help.
Example: hoodies for a team of 80
Example: A company orders branded hoodies for 80 employees. The model comes in unisex and women's cuts. 64 people answered the survey.
- Answers. Unisex: S 6, M 14, L 16, XL 10, XXL 4 (50 in total). Women's cut: XS 2, S 5, M 5, L 2 (14 in total).
- 16 non-respondents. The office manager asks team leads for help; where that fails, sizes are allocated to the most common unisex sizes based on the answers: M 5, L 6, XL 3, S 2.
- Reserve. 6 pieces are added for new hires and exchanges: unisex M 2, L 2, XL 1 and women's M 1. No extreme sizes are ordered as reserve.
- Final order. Unisex: S 8, M 21, L 24, XL 14, XXL 4; women's cut: XS 2, S 5, M 6, L 2 – 86 hoodies in total.
- Approval. Before production the supplier sends a print proof and a quantity summary. The office manager checks that each size and cut matches the table.
The numbers are illustrative. The size of the reserve depends on your hiring pace and on whether the same model can be reordered later – ask about this in the quote.
Reorders and new hires
The reserve does not need to cover the whole year. If the model is part of the manufacturer's permanent range, a smaller reserve and a later reorder may make more sense. Bear in mind, though, that a reorder is again subject to a minimum quantity and the shade or fabric batch may differ slightly. Ask in the quote whether the model will stay in the range and whether the logo print file and placement will be saved so that the reorder looks exactly the same. Keep the survey table in a form that contains only sizes and quantities, not names – it is the best basis for planning the next order.
Checklist before confirming the order
- The model has been chosen and its size chart in centimetres is at hand.
- The survey includes measuring instructions, a choice of cut and a deadline.
- Sizes for non-respondents have been thought through.
- Sample sizes have been tried on, or at least one sample has been checked.
- Logo size and position are approved for the smallest and largest size too.
- The reserve is in the most common sizes.
- The quantity summary by size and cut has been checked.
- The quote states the production time, minimum quantity and reorder options.
- Delivery addresses and packing (e.g. individually named packs) are agreed.
Common mistakes
- Asking for sizes before choosing the model. "What size do you wear?" means nothing if the ordered model's M is another brand's L.
- Unisex for everyone. It seems simple, but often means some women never wear the garment.
- Forgetting non-respondents. Something has to be ordered for them; decide in advance what.
- Reserve in extreme sizes. XS and 3XL stay in stock the longest; keep the reserve in M and L.
- One logo size for all. On a small size, a large print may reach the seams; approve the placement.
- Assuming the wrong size can be exchanged. A branded product is made to your order and cannot be resold to another client. Agree the terms before production.
You will find more advice on ordering company clothing on our blog.
Frequently asked questions
Can branded clothing be returned if the size does not fit?
Usually not, because the product is branded and made to your order. That is why it pays to confirm sizes carefully before production and agree the terms in the quote.
How much reserve should I order?
There is no single rule. Consider how many people you will hire in the coming months and whether the same model can be reordered later. Keep the reserve in the most common sizes.
Should I offer a women's cut?
If the garment will be worn every day, yes – if the model has one. For a one-off event T-shirt, unisex may be enough.
What about people who do not answer the survey?
Announce in advance which size will be ordered for them, ask team leads for help, and use the most common sizes if necessary.
Does the logo have to be the same size on every size?
Not necessarily. On very small and very large sizes a different logo width may work better; discuss this at the proof stage.
Is company clothing given to employees taxable?
If you give clothing to employees as a gift, in Estonia it is treated as a fringe benefit and the 21-euro rule for promotional gifts does not apply. Check the tax treatment of work uniforms with the Estonian Tax and Customs Board or your accountant.
Why Logotrade
Logotrade OÜ is a Tallinn-based company that has helped businesses order branded textiles and merchandise since 2004 and delivers across Estonia. We belong to the international promotional products networks PSI and ASI and are a member of the Estonian Chamber of Commerce and Industry. For company clothing we help you choose the model, send the size chart for your survey and recommend the branding method – such as embroidery, screen printing or DTF printing.
Browse our product range, services and portfolio. Send the model you have in mind, the approximate number of people and your deadline to logo@logo.ee or use the contact form. In the quote we will confirm the size chart, sample options, production time and minimum quantity.